MP-M-F - 晟江工业品

InstallationSystems > " Hot-DipGalvanizedParts " > PipeRings > MP-M-F

MP-M-F

已选总价:￥0.00
已选数量:0件

所有费用均已包含增值税，不含运费。运费详情请参阅运费指导书。

产品详情与编号

序号	产品编号	名称	Packaging unit	Thread - M	Clamping range - D	售价
	全部	全部	全部	全部	全部
1.0	304273	Heavy-d. pipe ring MP-M-F 1 1/2"	Packaging unit 25 pc	Thread - M M10	Clamping range - D 48 - 54 mm	￥74.00
2.0	304278	Heavy-d. pipe ring MP-M-F 3"	Packaging unit 1 pc	Thread - M M10	Clamping range - D 82 - 90 mm	￥97.50
3.0	304277	Heavy-d. pipe ring MP-M-F 2 1/2"	Packaging unit 10 pc	Thread - M M10	Clamping range - D 70 - 77 mm	￥92.50
4.0	304272	Heavy-d. pipe ring MP-M-F 1 1/4"	Packaging unit 25 pc	Thread - M M10	Clamping range - D 40 - 45 mm	￥68.10
5.0	304271	Heavy-d. pipe ring MP-M-F 1"	Packaging unit 25 pc	Thread - M M10	Clamping range - D 32 - 38 mm	￥60.10
6.0	304275	Heavy-d. pipe ring MP-M-F 2"	Packaging unit 10 pc	Thread - M M10	Clamping range - D 57 - 64 mm	￥84.20

注：本公司对上述参数保有最终解释权，如若变动，恕不通知。

MP-M-F NEW MP-M-F NEW Thread - M: M10 Maximum load - F: 1800 N Material composition: S235JR - DIN EN 10025 Features & Applications Features Solid welded-on connection boss Pipe ring hoops swaged for greater stiffness Clamping screws secured against loss Good resistance to corrosion (hot-dip galvanised 45 µm) Increased rigidity due to profiled clamping band Applications Heavy-duty installations up to 3" Indoor applications in humid atmospheres (moderate condensation) Outdoor applications in moderately corrosive conditions

Technical Data

Thread - M: M10
Maximum load - F: 1800 N
Material composition: S235JR - DIN EN 10025
Surface finish: Hot-dip galvanized, 45 µm - DIN EN ISO 1461
Clamping screw: M8
Tightening torque: 3 Nm
Cross section thickness - s: 2 mm
Cross section width - b: 24 mm