Stainless steel ball valves with electrical rotary actuator (industrial version), PN 63

ball valves - check valves - process valves > In-line ball valve with thread or welding ends > Stainless steel ball valves with electrical rotary actuator (industrial version), PN 63

已选总价:￥0.00
已选数量:0件

所有费用均已包含增值税，不含运费。运费详情请参阅运费指导书。

产品详情与编号

序号	产品编号	名称	Weight	electrical rotary actuator	Actuator size*	Installation length ball valve [mm]	DN [mm]	Thread	Voltage	Version	售价
	全部	全部	全部	全部	全部	全部	全部	全部	全部	全部
1.0	KH 10 ELI 220 ES		3kg / pc.	ELI 220-2F05VK11	2-F05-VK11	90	25	G 1"	85 - 240 V AC / DC	Standard	￥4623.84
2.0	KH 14 ELI 220 ES		2.3kg / pc.	ELI 220-2F03	2-F03	60	10	G 1/4"	85 - 240 V AC / DC	Standard	￥3839.60
3.0	KH 112 ELI 220 ES		4.5kg / pc.	ELI 220-2F05	2-F05	120	38	G 1 1/2"	85 - 240 V AC / DC	Standard	￥5905.68
4.0	KH 10 ELI 24 ES		3kg / pc.	ELI 24-2F05VK11	2-F05-VK11	90	25	G 1"	12 - 24 V AC / DC	Standard	￥4623.84
5.0	KH 20 ELI 24 ES		6kg / pc.	ELI 24-3F05	3-F05	140	50	G 2"	12 - 24 V AC / DC	Standard	￥8082.64
6.0	KH 20 ELI 220 ES-AS		6kg / pc.	ELI 220-3F05	3-F05	140	50	G 2"	85 - 240 V AC / DC	Welding ends	￥8082.64
7.0	KH 10 ELI 220 ES-AS		2.9kg / pc.	ELI 220-2F05VK11	2-F05-VK11	90	25	G 1"	85 - 240 V AC / DC	Welding ends	￥4623.84
8.0	KH 30 ELI 24 ES		14kg / pc.	ELI 24-4F07	4-F07	205	80	G 3"	12 - 24 V AC / DC	Standard	￥15070.56
9.0	KH 34 ELI 24 ES		2.7kg / pc.	ELI 24-2F03	2-F03	80	20	G 3/4"	12 - 24 V AC / DC	Standard	￥4025.36
10.0	KH 14 ELI 24 ES		2.3kg / pc.	ELI 24-2F03	2-F03	60	10	G 1/4"	12 - 24 V AC / DC	Standard	￥3839.60
11.0	KH 12 ELI 24 ES		2.5kg / pc.	ELI 24-2F03	2-F03	75	15	G 1/2"	12 - 24 V AC / DC	Standard	￥3839.60
12.0	KH 30 ELI 220 ES		14kg / pc.	ELI 220-4F07	4-F07	205	80	G 3"	85 - 240 V AC / DC	Standard	￥15070.56
13.0	KH 112 ELI 24 ES		4.5kg / pc.	ELI 24-2F05	2-F05	120	38	G 1 1/2"	12 - 24 V AC / DC	Standard	￥5905.68
14.0	KH 34 ELI 220 ES-AS		2.5kg / pc.	ELI 220-2F03	2-F03	80	20	G 3/4"	85 - 240 V AC / DC	Welding ends	￥4025.36
15.0	KH 40 ELI 220 ES		-	ELI 220-6F10	6-F10	240	100	G 4"	85 - 240 V AC / DC	Standard	￥20901.52

注：本公司对上述参数保有最终解释权，如若变动，恕不通知。

Stainless steel ball valves with electrical rotary actuator (industrial version), PN 63

Ball valve:
Materials: Housing: 1.4408, ball: 1.4408, seal: PTFE (15% GF), length according to DIN 3202-M3
Temperature range: -20°C to max. +180°C
Operating range: Water, oil, compressed air, vacuum (max. -0.9 bar), fuels, solvents, aggressive media
Optional: Welding ends -AS, 3.1b certificate
Rotary actuator: Electrical rotary actuator with optical position indicator, manual emergency operation and switch room heating Two additional limit switches are installed for further control requirements. An electronic torque limiting unit prevents damage in the event of overload. The manual emergency operation can be done without dismantling the external cladding.
Temperature range: -10°C to max. +70°C
Voltage: Type 24: 12 - 24 V AC/DC, type 220: 85 - 240 V AC/DC (rotary actuators can be operated with DC and AC).
Protection class: IP 65
Power-on time: 75 %
Regulating time: 8 to 12 seconds
Optional: Regulating time 140 sec. (only for actuator size 2) -140, "Battery Safety Return" for emergency closing NC (standard configuration) or emergency opening NO (switch via jumper) if there is a power failure -BSR
Advantages: •2 additional limit switches, •torque cut-off, •variable voltage (DC or AC), •manual emergency operation, •integrated heating in actuator housing
Warning: In case of high media temperatures, the actuator must be cooled if necessary!
*Dimensions and replacement actuators can be found further on in this chapter.

Catalogue page Pneumatic Atlas 8 (Page 483)

Technical documentation Suitable accessories:

Reducing nipple with cylindrical male and female thread, PN 16/40

Hydraulic threaded reductions with cylindrical male and female thread

Double nipple with cylindrical thread, PN 16/40

Double nipple with inch-thread (60° conical hose nipple), up to 400 bar

Double nipple separable with male thread - conically sealing, up to 25 bar

Threaded nozzles with cylindrical thread - internal cone, PN 10/16/40

Threaded nozzles with male thread and safety collar, Dimensions according to EN 14420-5 (DIN 2817)

PTFE sealing tape, standard quality

Loxeal thread seals

Straight screwed connections, Whitworth pipe thread (BSPP)

All technical data are to be understood as non-binding reference values. prices given plus VAT
Click here in order to show prices with VAT included.