Stainless steel safety contact pressure gauge, horizontal Ø 100 mm-Class 1.0
Pressure gauge with two switch contacts (magnetic quick contacts) for extra safety in line with S 3 EN 837-1 (DIN 16006) with blow-out back and unbreakable baffle wall
Materials: Housing: 1.4301, measuring system and connector: 1.4404, window: Laminated safety glass
Connection thread: G 1/2"*, back eccentric
dual contact: 1. Contact opens when exceeding the setpoint values; 2. contact closes when exceeding the setpoint values
Class: 1.0
Temperature range: Environment: -20°C to max. +60°C, measured material: max. +200°C
Protection class: IP 65
The switch function 21 is the one most commonly used. Should this not be as per your requirements, we request you to enquire with us.
*with centring pin for profiled seal
Catalogue page Pneumatic Atlas 8 (Page 597) Technical documentation Suitable accessories:

Reducers for pressure gauge connections with pin

Siphons DIN 16282, PN 25 / 100

Pressure gauge stop cocks DIN 16261 / DIN 16262, up to PN 25

Pressure gauge shut-off valves DIN 16270, up to PN 400

Screwed-on screw connections with female thread (pressure gauge couplings)

PTFE sealing tape, standard quality

PTFE thread sealing fibre

Pressure gauge profiled seals, for internal centring using a centring pin

Loxeal thread seals

Pressure gauge couplings with sealing cones to screw onto a screw connection.

All technical data are to be understood as non-binding reference values. prices given plus VAT
Click here in order to show prices with VAT included.